Module:Convert/text
Jump to navigation
Jump to search
Documentation for this module may be created at Module:Convert/text/doc
--[[ Text (messages) used by Module:Convert.
Nearly all of the text displayed by Module:Convert is in this module
(apart from the unit definitions in Module:Convert/data).
This is in a separate module to simplify translation for use on another wiki.
]]
-- Names when using engineering notation (a prefix of "eN" where N is a number).
-- key = { "name", "linked name, if link wanted" }
local eng_scales = {
["3"] = { "thousand", exponent = 3 },
["6"] = { "million", exponent = 6 },
["9"] = { "billion", "[[1000000000 (number)|billion]]", exponent = 9 },
["12"] = { "trillion", "[[1000000000000 (number)|trillion]]", exponent = 12 },
["15"] = { "quadrillion", "[[1000000000000000 (number)|quadrillion]]", exponent = 15 },
}
local all_categories = {
general = '[[Category:Convert error]]',
mismatch = '[[Category:Convert dimension mismatch]]',
option = '[[Category:Convert unknown option]]',
unknown = '[[Category:Convert unknown unit]]',
}
-- Following puts wanted style around each unit code marked like '...%{ft%}...'.
local unitcode_regex = '%%([{}])'
local unitcode_replace = { ['{'] = '<code style="background:transparent;">', ['}'] = '</code>' }
local all_messages = {
-- All output messages.
-- One of the following prefixes is inserted before each message.
cvt_prefix_error = '<span style="color:black; background-color:orange;">[[Module talk:Convert|Conversion error]]:',
cvt_prefix_warning = '<span style="color:black; background-color:peachpuff;">[[Module talk:Convert|Conversion warning]]:',
-- Each of following messages is a table:
-- { [1] = 'error text',
-- [2] = 'category key',
-- regex = gsub_regex,
-- replace = gsub_table,
-- warning = true, -- omit for an error message
-- }
cvt_bad_default = { 'Unit "%s" has an invalid default', 'unknown' },
cvt_bad_num = { 'Value "%s" must be a number', 'general' },
cvt_bad_num2 = { 'Second value "%s" must be a number', 'general' },
cvt_bad_prec = { 'Parameter precision "%s" must be an integer', 'general' },
cvt_bad_sigfig = { 'Parameter sigfig "%s" must be an integer', 'general' },
cvt_bad_unit = { 'Unit "%s" is invalid here', 'unknown' },
cvt_big_prec = { 'Precision "%s" is too large', 'general' },
cvt_bug_convert = { 'Bug: Cannot convert between specified units', 'general' },
cvt_empty_option = { 'Ignored empty option "%s"', 'option', warning = true },
cvt_invalid_num = { 'Number is too large or too small', 'general' },
cvt_mismatch = { 'Cannot convert "%s" to "%s"', 'mismatch' },
cvt_no_default = { 'Unit "%s" has no default output unit', 'unknown' },
cvt_no_num = { 'Need value', 'general' },
cvt_no_num2 = { 'Need second value', 'general' },
cvt_no_unit = { 'Need name of unit', 'unknown' },
cvt_unknown_option = { 'Ignored unknown option "%s"', 'option', warning = true },
cvt_should_be = { '%s', 'general', regex = unitcode_regex, replace = unitcode_replace },
cvt_sigfig_pos = { 'sigfig "%s" must be positive', 'general' },
cvt_unknown = { 'Unit "%s" is not known', 'unknown' },
}
local disp_joins = {
['or'] = { ' or ' , '' },
['sqbr-sp'] = { ' [' , ']' },
['sqbr-nbsp'] = { ' [' , ']' },
['comma'] = { ', ' , '' },
['slash-sp'] = { ' / ' , '' },
['slash-nbsp'] = { ' / ', '' },
['slash-nosp'] = { '/' , '' },
['b'] = { ' (' , ')' },
['br'] = { '<br/>' , '' },
}
local range_types = { -- text to separate values in a range
['by'] = ' by ',
['-'] = '–',
['to about'] = ' to about ',
['and'] = { ['off'] = ' and ', ['on'] = ' and ', exception = true },
['or'] = { ['off'] = ' or ' , ['on'] = ' or ' , exception = true },
['to'] = { ['off'] = ' to ' , ['on'] = ' to ' , exception = true },
['xx'] = ' × ',
['to(-)'] = { ['off'] = ' to ', ['on'] = '–' },
['+/-'] = { ['off'] = ' ± ', ['on'] = ' ± ', ['adj'] = ' ± ' },
['x'] = { ['off'] = ' by ', ['on'] = ' × ', is_range_x = true },
}
local range_aliases = {
['and(-)'] = 'and',
['&'] = 'and',
['–'] = '-',
['–'] = '-',
['to-'] = 'to(-)',
['×'] = 'x',
['±'] = '+/-',
}
local local_option_name = {
-- ["en name used in this module"] = "local text for option name"
["abbr"] = "abbr",
["adj"] = "adj",
["disp"] = "disp",
["lk"] = "lk",
["sing"] = "sing",
}
-- Convention: parms.opt_xxx refers to an option that is set here
-- (not intended to be set by the template which invokes this module).
-- Example: The option named "abbr" in this module can be assigned the value
-- "comma" at en.wiki (abbr=comma). In that case, this script sets:
-- parms["opt_nocomma"] = true
-- parms["abbr"] = nil
-- The last line means that parms.abbr will be nil, or will have
-- one of the values that do not start with "opt_".
local en_option_value = {
["abbr"] = {
-- ["local text for option value"] = "en value used in this module"
["comma"] = "opt_nocomma", -- no numsep in input or output numbers
["in"] = "in", -- use symbol for LHS unit
["mos"] = "mos", -- in range, repeat the input unit (no longer used)
["none"] = "off", -- old name for "off"
["off"] = "off", -- use name for all units
["on"] = "on", -- use symbol for all units
["out"] = "out", -- use symbol for RHS unit (default)
["values"] = "opt_values", -- show only input and output numbers, not units
["~"] = "opt_extra", -- show input unit symbol as well as name
},
["adj"] = {
["1"] = "opt_singular", -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1)
["flip"] = "opt_flip", -- reverse order of input/output
["j"] = "opt_use_nbsp", -- "join": use " " instead of " " between value and unit name
["mid"] = "opt_adj_mid", -- adj=on with user-specified text before input unit
["nocomma"] = "opt_nocomma", -- no numsep in input or output numbers
["off"] = "", -- ignored (adj=off is the default)
["on"] = "opt_adjectival", -- unit name is singular and hyphenated
["pre"] = "opt_one_preunit", -- user-specified text before input unit
["ri1"] = "ri1", -- round input with precision = 1
["ri2"] = "ri2", -- round input with precision = 2
["ri3"] = "ri3", -- round input with precision = 3
},
["disp"] = {
["/"] = "slash", -- join: '/'
["2"] = "opt_output_only",
["5"] = "opt_round5", -- round output value to nearest 5
["b"] = "b", -- join: '(...)'
["br"] = "br", -- join: '<br/>'
["comma"] = "comma", -- join: ','
["flip"] = "opt_flip", -- reverse order of input/output
["flip5"] = "special_flip5", -- combine disp=flip + disp=5
["nocomma"] = "opt_nocomma", -- no numsep in input or output numbers
["number"] = "opt_output_number_only",
["or"] = "or", -- join: 'or'
["out"] = "opt_output_only",
["output number only"] = "opt_output_number_only",
["output only"] = "opt_output_only",
["preunit"] = "opt_two_preunits", -- user-specified text before input and output units
["s"] = "slash", -- join: '/'
["slash"] = "slash", -- join: '/'
["sqbr"] = "sqbr", -- join: '[...]'
["table"] = "opt_table", -- output suitable for a table cell with align="right"
["tablecen"] = "opt_tablecen", -- output suitable for a table cell with align="center"
["u2"] = "opt_output_unit_only",
["unit"] = "opt_input_unit_only",
["unit2"] = "opt_output_unit_only",
["x"] = "x", -- join: 'by...×'
},
["lk"] = {
["in"] = "in", -- link LHS unit name or symbol
["off"] = "", -- ignored (lk=off is the default)
["on"] = "on", -- link all unit names or symbols
["out"] = "out", -- link RHS unit name or symbol
},
}
return {
all_categories = all_categories,
all_messages = all_messages,
disp_joins = disp_joins,
en_option_value = en_option_value,
eng_scales = eng_scales,
local_option_name = local_option_name,
range_aliases = range_aliases,
range_types = range_types,
}