Module:Convert
Documentation for this module may be created at Module:Convert/doc
--[[
TODO Too many items to list, but following are some points:
- Output needs rather than space in several places.
- Some conversions require two outputs: {{convert|55|nmi|km mi}}.
- Some units have two values: {{convert|3.21|m|ftin}}.
- Remove commas from input numbers; add to output (always?).
- Use U+2212 MINUS SIGN for input + output number, not '-'.
]]
local function clonetable(t)
-- Return a shallow copy of t.
result = {}
for k, v in pairs(t) do
result[k] = v
end
return result
end
--[[-----BEGIN DATA TABLES-----
Three data tables follow:
SIprefixes prefixes like 'M' (mega, 10^6)
units all properties for a unit, including default output
defaultunits default output exceptions ('Mg' and 'g' have different defaults)
SIprefixes and defaultunits are maintained by editing this file.
However, the units table is generated by a script which reads the wikitext
for a wiki page that documents properties of units.
Could consider putting some or all tables in another module.
Check values at http://en.wikipedia.org/wiki/Conversion_of_units
and http://en.wikipedia.org/wiki/Template:Convert/list_of_units
]]
local SIprefixes = {
['Y'] = { exponent = 24, name = 'yotta' },
['Z'] = { exponent = 21, name = 'zetta' },
['E'] = { exponent = 18, name = 'exa' },
['P'] = { exponent = 15, name = 'peta' },
['T'] = { exponent = 12, name = 'tera' },
['G'] = { exponent = 9, name = 'giga' },
['M'] = { exponent = 6, name = 'mega' },
['k'] = { exponent = 3, name = 'kilo' },
['H'] = { exponent = 2, name = 'hecto' }, -- not an SI prefix, but allow for people typing this
['h'] = { exponent = 2, name = 'hecto' },
['da']= { exponent = 1, name = 'deca' },
['D'] = { exponent = 1, name = 'deca' }, -- not an SI prefix, but allow for people typing this
['d'] = { exponent = -1, name = 'deci' },
['c'] = { exponent = -2, name = 'centi' },
['m'] = { exponent = -3, name = 'milli' },
['µ'] = { exponent = -6, name = 'micro' },
['u'] = { exponent = -6, name = 'micro' }, -- not an SI prefix, but allow for people typing this
['n'] = { exponent = -9, name = 'nano' },
['p'] = { exponent =-12, name = 'pico' },
['f'] = { exponent =-15, name = 'femto' },
['a'] = { exponent =-18, name = 'atto' },
['z'] = { exponent =-21, name = 'zepto' },
['y'] = { exponent =-24, name = 'yocto' },
}
local units = {
lookup = function (self, unit)
-- Return true, t where t is the unit's converter table (or false, message).
-- Given 'unit' is a symbol (like 'g'), with an optional SI prefix (as in 'kg').
-- If, for example, 'kg' is in this table, that entry is used; otherwise prefix is applied.
local t = self[unit]
if t ~= nil then
local result = clonetable(t)
result.baseunit = unit
result.prefix = ""
return true, result
end
for plen = 2, 1, -1 do
-- Check for longer prefix first ('dam' is decametre).
local prefix = string.sub(unit, 1, plen)
local si = SIprefixes[prefix]
if si ~= nil then
local baseunit = unit:sub(plen+1)
local t = self[baseunit]
if t ~= nil and t.prefixes == true then
local result = clonetable(t)
local pname = si.name -- LATER: is there no better way?
result.name1 = pname .. result.name1
result.name1_us = pname .. result.name1_us
result.name2 = pname .. result.name2
result.name2_us = pname .. result.name2_us
result.baseunit = baseunit
result.prefix = prefix
result.scale = t.scale * 10^si.exponent
return true, result
end
end
end
local msg = 'Unit %s is not known.[[Category:Convert unknown unit]]'
return false, msg:format(unit)
end,
["m2"] = {
name1 = "square metre",
name1_us = "square meter",
name2 = "square metres",
name2_us = "square meters",
symbol = "m<sup>2</sup>",
sym_us = "m<sup>2</sup>",
utype = "area",
scale = 1,
offset = 0,
default = "sqyd",
},
["a"] = {
name1 = "are",
name1_us = "are",
name2 = "ares",
name2_us = "ares",
symbol = "a",
sym_us = "a",
utype = "area",
scale = 100,
offset = 0,
prefixes = true,
default = "acre",
},
["sqft"] = {
name1 = "square foot",
name1_us = "square foot",
name2 = "square feet",
name2_us = "square feet",
symbol = "sq ft",
sym_us = "sq ft",
utype = "area",
scale = 0.09290304,
offset = 0,
default = "m2",
},
["sqyd"] = {
name1 = "square yard",
name1_us = "square yard",
name2 = "square yards",
name2_us = "square yards",
symbol = "sq yd",
sym_us = "sq yd",
utype = "area",
scale = 0.83612736,
offset = 0,
default = "m2",
},
["acre"] = {
name1 = "acre",
name1_us = "acre",
name2 = "acres",
name2_us = "acres",
symbol = "acre",
sym_us = "acre",
utype = "area",
scale = 4046.8564224,
offset = 0,
default = "ha",
},
["m"] = {
name1 = "metre",
name1_us = "meter",
name2 = "metres",
name2_us = "meters",
symbol = "m",
sym_us = "m",
utype = "length",
scale = 1,
offset = 0,
prefixes = true,
default = "ft",
},
["mi"] = {
name1 = "mile",
name1_us = "mile",
name2 = "miles",
name2_us = "miles",
symbol = "mi",
sym_us = "mi",
utype = "length",
scale = 1609.344,
offset = 0,
default = "km",
},
["ft"] = {
name1 = "foot",
name1_us = "foot",
name2 = "feet",
name2_us = "feet",
symbol = "ft",
sym_us = "ft",
utype = "length",
scale = 0.3048,
offset = 0,
default = "m",
},
["foot"] = {
name1 = "foot",
name1_us = "foot",
name2 = "feet",
name2_us = "feet",
symbol = "ft",
sym_us = "ft",
utype = "length",
scale = 0.3048,
offset = 0,
default = "m",
},
["yd"] = {
name1 = "yard",
name1_us = "yard",
name2 = "yards",
name2_us = "yards",
symbol = "yd",
sym_us = "yd",
utype = "length",
scale = 0.3048 * 3,
offset = 0,
default = "m",
},
["in"] = {
name1 = "inch",
name1_us = "inch",
name2 = "inches",
name2_us = "inches",
symbol = "in",
sym_us = "in",
utype = "length",
scale = 0.0254,
offset = 0,
default = "cm",
},
["g"] = {
name1 = "gram",
name1_us = "gram",
name2 = "grams",
name2_us = "grams",
symbol = "g",
sym_us = "g",
utype = "mass",
scale = 0.001,
offset = 0,
prefixes = true,
default = "oz",
},
["lb"] = {
name1 = "pound",
name1_us = "pound",
name2 = "pounds",
name2_us = "pounds",
symbol = "lb",
sym_us = "lb",
utype = "mass",
scale = 0.45359237,
offset = 0,
default = "kg",
},
["oz"] = {
name1 = "ounce",
name1_us = "ounce",
name2 = "ounces",
name2_us = "ounces",
symbol = "oz",
sym_us = "oz",
utype = "mass",
scale = 0.45359237/16,
offset = 0,
default = "g",
},
["ozt"] = {
name1 = "troy ounce",
name1_us = "troy ounce",
name2 = "troy ounces",
name2_us = "troy ounces",
symbol = "ozt",
sym_us = "ozt",
utype = "mass",
scale = 0.0311034768,
offset = 0,
default = "g",
},
["K"] = {
name1 = "kelvin",
name1_us = "kelvin",
name2 = "kelvins",
name2_us = "kelvins",
symbol = "K",
sym_us = "K",
utype = "temperature",
scale = 1,
offset = 0,
default = "C",
},
["C"] = {
name1 = "degree Celsius",
name1_us = "degree Celsius",
name2 = "degrees Celsius",
name2_us = "degrees Celsius",
symbol = "°C",
sym_us = "°C",
utype = "temperature",
scale = 1,
offset = -273.15,
default = "F",
},
["°C"] = {
name1 = "degree Celsius",
name1_us = "degree Celsius",
name2 = "degrees Celsius",
name2_us = "degrees Celsius",
symbol = "°C",
sym_us = "°C",
utype = "temperature",
scale = 1,
offset = -273.15,
default = "F",
},
["F"] = {
name1 = "degree Fahrenheit",
name1_us = "degree Fahrenheit",
name2 = "degrees Fahrenheit",
name2_us = "degrees Fahrenheit",
symbol = "°F",
sym_us = "°F",
utype = "temperature",
scale = 5/9,
offset = 32-273.15*(9/5),
default = "C",
},
["°F"] = {
name1 = "degree Fahrenheit",
name1_us = "degree Fahrenheit",
name2 = "degrees Fahrenheit",
name2_us = "degrees Fahrenheit",
symbol = "°F",
sym_us = "°F",
utype = "temperature",
scale = 5/9,
offset = 32-273.15*(9/5),
default = "C",
},
["m3"] = {
name1 = "cubic metre",
name1_us = "cubic meter",
name2 = "cubic metres",
name2_us = "cubic meters",
symbol = "m<sup>3</sup>",
sym_us = "m<sup>3</sup>",
utype = "volume",
scale = 1,
offset = 0,
default = "cuyd",
},
["l"] = {
name1 = "litre",
name1_us = "liter",
name2 = "litres",
name2_us = "liters",
symbol = "l",
sym_us = "l",
utype = "volume",
scale = 0.001,
offset = 0,
prefixes = true,
default = "imppt",
},
["L"] = {
name1 = "litre",
name1_us = "liter",
name2 = "litres",
name2_us = "liters",
symbol = "L",
sym_us = "L",
utype = "volume",
scale = 0.001,
offset = 0,
prefixes = true,
default = "imppt",
},
["cuyd"] = {
name1 = "cubic yard",
name1_us = "cubic yard",
name2 = "cubic yards",
name2_us = "cubic yards",
symbol = "cu yd",
sym_us = "cu yd",
utype = "volume",
scale = 0.764554857984,
offset = 0,
default = "m3",
},
["USgal"] = {
name1 = "US gallon",
name1_us = "U.S. gallon",
name2 = "US gallons",
name2_us = "U.S. gallons",
symbol = "US gal",
sym_us = "U.S. gal",
utype = "volume",
scale = 0.003785411784,
offset = 0,
default = "L",
},
["USoz"] = {
name1 = "US fluid ounce",
name1_us = "U.S. fluid ounce",
name2 = "US fluid ounces",
name2_us = "U.S. fluid ounces",
symbol = "US fl oz",
sym_us = "U.S. fl oz",
utype = "volume",
scale = 0.003785411784/128,
offset = 0,
default = "cL",
},
["USpt"] = {
name1 = "U.S. pint",
name1_us = "U.S. pint",
name2 = "U.S. pints",
name2_us = "U.S. pints",
symbol = "US pt",
sym_us = "US pt",
utype = "volume",
scale = 0.003785411784/8,
offset = 0,
default = "dL",
},
["impgal"] = {
name1 = "imperial gallon",
name1_us = "imperial gallon",
name2 = "imperial gallons",
name2_us = "imperial gallons",
symbol = "imp gal",
sym_us = "imp gal",
utype = "volume",
scale = 0.00454609,
offset = 0,
default = "L",
},
["impoz"] = {
name1 = "imperial fluid ounce",
name1_us = "imperial fluid ounce",
name2 = "imperial fluid ounces",
name2_us = "imperial fluid ounces",
symbol = "imp fl oz",
sym_us = "imp fl oz",
utype = "volume",
scale = 0.00454609/160,
offset = 0,
default = "cL",
},
["imppt"] = {
name1 = "imperial pint",
name1_us = "imperial pint",
name2 = "imperial pints",
name2_us = "imperial pints",
symbol = "imp pt",
sym_us = "imp pt",
utype = "volume",
scale = 0.00454609/8,
offset = 0,
default = "dL",
},
}
local defaultunits = {
lookup = function (self, unit_table)
-- Return true, s where s = name of unit's default output unit (or false, message).
local baseunit = unit_table.baseunit
local prefix = unit_table.prefix
local unit = prefix .. baseunit
local default = self[unit]
if default ~= nil then return true, default end
t = units[baseunit]
if t ~= nil then
local default = t.default
if default ~= nil then return true, default end
end
local msg = 'Unit %s has no default target conversion.[[Category:Convert unknown unit]]'
return false, msg:format(unit)
end,
-- Prefixed units with a default different from that of the base unit.
['kg'] = 'lb',
['Mg'] = 'lb',
['Gg'] = 'lb',
['pm'] = 'in',
['nm'] = 'in',
['um'] = 'in',
['mm'] = 'in',
['cm'] = 'in',
['dm'] = 'in',
['dam'] = 'yd',
['Hm'] = 'yd',
['km'] = 'mi',
['Mm'] = 'mi',
['mL'] = 'impoz',
['cL'] = 'impoz',
['dL'] = 'impoz',
['daL'] = 'impgal',
['HL'] = 'impgal',
}
-------END DATA TABLES-----
-- Configuration options to keep magic values in one location.
local config = {}
local function get_config(frame)
-- Return table of configuration options.
-- Unclear if this is currently needed, but it may help if adapting
-- code for a different wiki.
local cfg = {}
-- Following settings are defaults that can be overridden by template.
cfg.numdot = '.' -- decimal mark before fractional digits
cfg.numsep = ',' -- thousands separator for numbers (',', '.', or nil)
for k, v in frame:argumentPairs() do
cfg[k] = v -- arguments from template's {{#invoke:}}
end
-- Following settings are mandatory (to limit abuse).
cfg.maxsigfig = 20 -- maximum number of significant figures
return cfg
end
local function withseparator(text)
-- Return string for a number with thousand separators inserted.
-- Parameter text is a string like "-12345" or "12345.6789".
-- Separator is inserted only in the integer part (not in fraction).
-- Four-digit integer parts have a separator (like "1,234").
local numsep = config.numsep
if #numsep == 0 then
return text
end
local function insert(text, first, last)
local result = ''
while last >= first do
if last >= first + 3 then
result = numsep .. text:sub(last-2, last) .. result
last = last - 3
else
return text:sub(first, last) .. result
end
end
return result
end
local first = 1
local sign = text:sub(first, 1)
if sign == '+' or sign == '-' then
-- To handle Unicode minus (multibyte), perhaps use following:
-- first = text:find('%d')
first = 2
else
sign = ''
end
local last = text:find(config.numdot, first, true)
if last == nil then
last = #text
else
last = last - 1
end
return sign .. insert(text, first, last) .. text:sub(last+1)
end
local function formatnumber(value, sigfig)
-- Return result of converting number 'value' to a string,
-- rounded to 'sigfig' significant figures.
local format = string.format
local rep = string.rep
local sign = ''
local numdot = config.numdot
local function zeropad(text, dot)
count = sigfig - #text
if count <= 0 then
return text
end
return text .. dot .. rep('0', count)
end
if sigfig <= 0 then
sigfig = 1
elseif sigfig > config.maxsigfig then
sigfig = config.maxsigfig
end
if value == 0 then
return zeropad('0', numdot)
end
if value < 0 then
sign = '-' -- need proper Unicode minus
value = -value
end
local digits
local exp, frac = math.modf(math.log10(value))
if frac == 0 then
-- Value 1 gives frac = 0, and 0.1 gives frac = -0 (negative zero).
-- Both results give true in 'if frac == 0'.
digits = zeropad('1', '')
exp = exp + 1 -- adjust so dot is before digits
else
local prec = sigfig
if value > 1 then
prec = prec - 1 -- will be one sig fig before dot
end
digits = format(format('%%.%df', prec), 10^frac)
if value < 1 then
-- Is MediaWiki run in a locale where following might be '0,'?
assert(digits:sub(1, 2) == '0.', 'Bug: rounded number not 0.xxx')
digits = digits:sub(3)
else
if prec == 0 then
assert(digits:find(numdot, 1, true) == nil, 'Bug: unexpected dot')
else
assert(digits:sub(2, 2) == numdot, 'Bug: rounded number not x.xxx')
digits = digits:sub(1, 1) .. digits:sub(3)
end
exp = exp + 1 -- adjust so dot is before digits
end
end
if exp >= #digits then
digits = digits .. rep('0', exp - #digits) -- result has no dot
elseif exp <= 0 then
digits = '0' .. numdot .. rep('0', -exp) .. digits
else
digits = digits:sub(1, exp) .. numdot .. digits:sub(exp+1)
end
return sign .. digits
end
local function require_number(value, missing, invalid)
-- Return true, n where n = number equivalent to given value (or false, message).
-- Thousand separators (valid or not) are first removed.
if value == nil then return false, missing end
if type(value) == 'number' then return true, value end
local numsep = config.numsep
if #numsep > 0 then value = string.gsub(value, numsep, '') end
local number = tonumber(value)
if number == nil then return false, invalid:format(value) end
return true, number
end
local function require_integer(value, missing, invalid)
-- Return true, n where n = integer equivalent to given value (or false, message).
local success, number = require_number(value, missing, invalid)
if not success then return success, number end
if number ~= math.floor(number) then return false, invalid:format(value) end
return true, number
end
local function get_parms(pframe)
-- Return true, t where t is a table with all arguments passed to the template
-- converted to named arguments. The numeric args are used to add named args:
-- in_text, in_text2 (strings given for value, value2)
-- value, in_unit, out_unit, value2, range, round_to
-- (except for range, which is nil or a table, the named args that are
-- added here could be provided by the user of the template).
local range_types = { -- text to separate input, output ranges
['and'] = {' and ', ' and '},
['by'] = {' by ', ' by '},
['to'] = {' to ', ' to '},
['-'] = {'–', '–'},
['to(-)'] = {' to ', '–'},
['x'] = {' by ', ' × '},
['+/-'] = {' ± ', ' ± '},
}
local success, t
local args = {} -- arguments passed to template
for k, v in pframe:argumentPairs() do
args[k] = v
end
args.in_text = args[1]
success, t = require_number(args.in_text, 'Need value', 'Value "%s" must be a number')
if not success then return success, t else args.value = t end
local in_unit = args[2]
local i = 3
local range = range_types[in_unit]
if range ~= nil then
args.in_text2 = args[3]
success, t = require_number(args.in_text2, 'Need second value', 'Second value "%s" must be a number')
if not success then return success, t else args.value2 = t end
in_unit = args[4]
i = 5
end
local out_unit = args[i]
local round_to = args[i+1]
if in_unit == nil then return false, 'Need input unit' end
args.in_unit = in_unit
args.out_unit = out_unit
args.range = range
args.round_to = args.round_to or round_to -- allow named parameter
return true, args
end
local function default_roundto(intext, factor)
-- Return a default value for round_to (an integer like 2, 0, -2).
-- prec = (precision implied in intext)
-- = (#digits after dot, or negative of #zeroes before dot)
-- If conversion is multiplication by a factor, and
-- if factor >= 0.02, compensate prec by adding N where:
-- N factor is in range
-- 1 .02 : .2 = .1/5 : .1*2
-- 0 .2 : 2 = 1/5 : 1*2
-- -1 2 : 20 = 10/5 : 10*2
-- -2 20 : 200 = 100/5 : 100*2 etc.
-- TODO Exception required for temperature.
prec = 0
dot = intext:find('.', 1, true)
if dot ~= nil then
prec = intext:sub(dot+1):len()
if prec == 0 then
intext = intext:sub(1, -2)
end
end
if prec == 0 then
prec = -intext:match('0*$'):len()
end
if factor ~= nil and factor >= 0.02 then
prec = prec - math.floor(math.log10(factor*5))
end
return prec
end
local function scaled(value, in_unit, out_unit)
-- Return scaled value for a simple convert.
return (value - in_unit.offset)
* (in_unit.scale / out_unit.scale)
+ out_unit.offset
end
local function cvtround(invalue, intext, parms)
-- Return true, s where s = rounded, formatted string from converting invalue,
-- using the rounding specified in parms (s = '' if invalue == nil).
-- This code combines convert/round because some rounding requires
-- knowledge of what we are converting.
-- TODO Lots of checking required. Will need tweaks for special cases
-- handled by old Template:Convert.
-- TODO Limit values to avoid abuse (for example, can currently set
-- round_to to very large values like 999).
local text = ''
if invalue == nil then return true, text end
local outvalue = scaled(invalue, parms.in_unit_table, parms.out_unit_table)
local round_to = parms.round_to
local sigfig = parms.sigfig
local disp = parms.disp
local auto = false
if round_to then
-- Ignore sigfig, disp.
success, round_to = require_integer(round_to, 'Need value', 'round_to "%s" must be an integer')
if not success then return success, round_to end
elseif sigfig then
-- Ignore disp.
success, sigfig = require_integer(sigfig, 'Need value', 'sigfig "%s" must be an integer')
if not success then return success, sigfig end
if sigfig <= 0 then
msg = 'sigfig "%s" must be positive'
return false, msg:format(parms.sigfig)
end
text = formatnumber(outvalue, sigfig)
elseif disp == '5' then
local negative = false
if outvalue < 0 then
negative = true
outvalue = -outvalue
end
outvalue = math.floor((outvalue / 5) + 0.5) * 5
if negative then
outvalue = -outvalue
end
text = string.format('%.0f', outvalue)
else
auto = true -- using default rounding
-- TODO If conversion is not multiplication by a number, need factor = nil.
local factor = outvalue / invalue
round_to = default_roundto(intext, factor)
end
if round_to then
if round_to >= 0 then
if auto then
-- TODO No less than two significant figures.
end
-- It seems format('%d', x) uses modf to extract integer from x
-- with result '0' if x is 0 or -0 (negative zero).
-- Using format('%.0f', x) gives '-0' if x is negative zero.
local fmt = '%.' .. string.format('%d', round_to) .. 'f'
text = string.format(fmt, outvalue)
else
-- This always keeps two sig figs. Should that be done if not auto?
round_to = -round_to -- #digits that want to zero
local maxzeroes = 0 -- maximum #digits that should be zeroed
if outvalue > 100 then
maxzeroes = math.modf(math.log10(outvalue)) - 1
end
if round_to > maxzeroes then
round_to = maxzeroes
end
if round_to > 0 then
local scaled = string.format('%.0f', outvalue/(10^round_to))
text = scaled .. string.rep('0', round_to)
else
text = formatnumber(outvalue, 2) -- can't zero digits; keep 2 sig figs
end
end
end
return true, withseparator(text)
end
local disp_single = {
['or'] = '%s %s or %s %s',
['sqbr'] = '%s %s [%s %s]',
['comma'] = '%s %s, %s %s',
['slash'] = '%s %s / %s %s',
['s'] = '%s %s / %s %s',
['b'] = '%s %s (%s %s)',
}
local disp_double = {
['or'] = '%s%s%s %s or %s%s%s %s',
['sqbr'] = '%s%s%s %s [%s%s%s %s]',
['comma'] = '%s%s%s %s, %s%s%s %s',
['slash'] = '%s%s%s %s / %s%s%s %s',
['s'] = '%s%s%s %s / %s%s%s %s',
['b'] = '%s%s%s %s (%s%s%s %s)',
}
local function process(parms)
-- Return true, s where s = final wikitext result (or false, message).
local success, t
success, t = units:lookup(parms.in_unit)
if not success then return success, t else parms.in_unit_table = t end
if parms.out_unit == nil then -- need to catch empty string also?
success, t = defaultunits:lookup(parms.in_unit_table)
if not success then return success, t else parms.out_unit = t end
end
success, t = units:lookup(parms.out_unit)
if not success then return success, t else parms.out_unit_table = t end
if parms.in_unit_table.utype ~= parms.out_unit_table.utype then
local msg = 'Cannot convert %s to %s.[[Category:Convert dimension mismatch]]'
return false, msg:format(parms.in_unit_table.utype, parms.out_unit_table.utype)
end
local intext1, outtext1 = parms.in_text, nil
local intext2, outtext2 = parms.in_text2, nil
success, outtext1 = cvtround(parms.value, intext1, parms)
if not success then return success, outtext1 end
success, outtext2 = cvtround(parms.value2, intext2, parms)
if not success then return success, outtext2 end
local range = parms.range
local disp = parms.disp
local wikitext
intext1 = withseparator(intext1) -- TODO what if intext1 already has commas?
-----------------------------------------------------------------------------
-- TODO Clean up following (a first try at using proper names/symbols).
local inkey, outkey, symkey = 'name2', 'name2', 'symbol'
if parms.value == 1 then
inkey = 'name1'
end
local outvalue = 2 -- dummy value
if outvalue == 1 then -- TODO need to know if value from cvtround needs singular or plural name
outkey = 'name1'
end
if parms.sp == 'us' then
inkey = inkey .. '_us'
outkey = outkey .. '_us'
symkey = 'sym_us'
end
local in_name = parms.in_unit_table[inkey] -- will not need to calculate all of these
local in_symbol = parms.in_unit_table[symkey]
local out_name = parms.out_unit_table[outkey]
local out_symbol = parms.out_unit_table[symkey]
local abbr = parms.abbr
local in_id, out_id
if abbr == 'on' then -- all symbols
in_id = in_symbol
out_id = out_symbol
elseif abbr == 'off' then -- all names
in_id = in_name
out_id = out_name
elseif abbr == 'in' then -- input symbols
in_id = in_symbol
out_id = out_symbol
elseif abbr == 'out' then -- output symbols [is this just the default?]
in_id = in_name
out_id = out_symbol
elseif abbr == 'values' then -- show only values
-- LATER
elseif abbr == 'mos' then -- for ranges, abbreviate with input unit repeated
-- LATER
else -- default
in_id = in_name
out_id = out_symbol
end
if range == nil then
if disp == 'output only' then
wikitext = '%s %s'
wikitext = wikitext:format(outtext1, out_id)
elseif disp == 'output number only' or disp == 'number' then
wikitext = outtext1
elseif disp == 'unit' then
wikitext = in_id
elseif disp == 'unit2' then
wikitext = out_id
elseif disp == 'flip' then
wikitext = disp_single['b']
wikitext = wikitext:format(outtext1, out_id, intext1, in_id)
else
wikitext = disp_single[disp] or disp_single['b']
wikitext = wikitext:format(intext1, in_id, outtext1, out_id)
end
else
-- TODO Need in_id, out_id (and more) here.
wikitext = disp_double[disp] or disp_double['b']
wikitext = wikitext:format(intext1, range[1], intext2, in_id, outtext1, range[2], outtext2, out_id)
end
-----------------------------------------------------------------------------
return true, wikitext
end
-- Used by template {{convert2}}.
-- We will have to keep old {{convert}} for a long time, and run
-- {{convert2}} in parallel with {{convert}} while testing/developing.
local p = {}
local bodge = require "Module:mw" -- This fixes up mw.text.tag for us.
function p.convert(frame)
config = get_config(frame)
local pframe = frame:getParent()
local parms, text
success, parms = get_parms(pframe)
if success then
success, text = process(parms)
end
if not success then
local params = {style="color:black; background-color:orange;"}
text=mw.text.tag({name="span", contents="[[Module talk:Convert|Conversion error]]: " .. text, params=params})
end
return text
end
return p